belt sizes or part numbers for C-141

Posted: Sat Jan 15, 2011 11:06 am

i am trying to rebuild a C-141 . could anyone tell me what size belts the horse uses? it came with none.

Posted: Mon Jan 17, 2011 6:31 pm

Hello! Automatic or 8 speed? There is a link here somewhere to the Toro Master Parts list. Put in your model number and it will show you most assembly drawings for your tractor. Probably different belts for Auto or 8 speed. Hope this helps ya! I'll check back later if ya need more info just ask!

Posted: Tue Jan 18, 2011 5:24 am

hi, and thanks. i have tried the site you recomend. when i put the model nomber in it says it is not a valid number. here is every number i can find on it . it says model and lot no, 145.834.372 and serial no, 41-026-9407 then off by it self is JO95D i cant get anywhere with these numbers maybe you guys can help. i found a complete set of decals for it. and it is the 8 speed. i thank you in advance. steve

Posted: Tue Jan 18, 2011 8:59 am

The 141's were late 70's, 78 & 79. Try putting one of these numbers in It should get youu some info. 78 8 speed - (81-K14801) 79 lists two numbers (91-K14801) (91-K14802). That should get you a part number to search for or cross reference. NAPA had the right belt for my 121, but it is an automatic. Good Luck! Also the Toro site will let you do a model search w/ there own numbers, it is kinda sensitive to how you type them in. Hope this gets ya there!

Posted: Tue Jan 18, 2011 9:36 am

thanks very much. the 78 number works . thanks again

Posted: Tue Jan 18, 2011 12:21 pm

Glad to help, Have fun with it!